Microphone Preamplifier Model AWA14600E~14614E
ICP Compatible
BNC connector for easy installation and use
Low output impeda
FEATURES
O 1/2”prepolarized microphone compatible
O Lemoconnector with cable for easy installation and use
O Lowoutput impedance so that long extension cable can be used
USES
O Signalanalysis measurements setups
O With 1/2”Prepolarized Condenser Microphones
O Soundpower measurements
O Machinerynoise measurements
SPECIFICATIONS
Specifications | AWA14600E | AWA14601 | AWA14603 | AWA14604 | AWA14614E | Photos | | | | | | Frequency Response (re. 250 Hz) | 10 Hz ~ 20 kHz, ±0.2 dB 5 Hz ~ 200 kHz, ±0.5 dB | 10 Hz ~ 50 kHz, ± 0.2 dB 5 Hz ~ 50 kHz, ± 0.5 dB | 20 Hz ~ 20 kHz, ± 0.2 dB 10 Hz ~ 100 kHz, ± 0.5 dB | 20 Hz ~ 20 kHz, ± 0.2 dB 10 Hz ~ 100 kHz, ± 0.5 dB | Measurement Range(dB) (re. 50mV/Pa) | 15 ~ 140 | 15 ~ 120 | 15 ~ 134 | Gain | —0.2dB | 20 dB | —0.15dB | —0.25dB | InputImpedance | ≥10GΩ//0.5pF | ≥10GΩ//0.35pF | Noise | A—weighting(20 pF) <4 pV Z—weighting(20 pF) < 10 pV; | A—weighting(20 pF) <2.5 pV Z—weighting(20 pF) < 10 pV; | A—weighting(20 pF) <4 pV Z—weighting(20 pF) < 10 pV; | A—weighting(20 pF) <4 pV Z—weighting(20 pF) < 15 pV; | A —weighting (6.5 pF) <8.5 pV Z —weighting (6.5 pF) < 35 pV; | Distortion(THD) | <—60dB | Output Impedance | <150Ω | <50Ω | Max. Output Voltage: | 20 Vp—p(at power voltage 30V) | 8 VRLVIS(at Power Voltage 30 V) | 6 VRLVIS(at Power Voltage 24 V) | Power Voltage | 15 V ~ 45 V | 9 ~ 30 V | ICP 2mA ~ 10mA | OperatingCurrent | 1 mA | 2 mA | ICP 2mA ~ 10mA | Polarization Voltage (V) | 200, 28, 0 | 0 | OutsideDiameter | N12.7mm(1/2”) | N6.35mm(1/4”) | Weight | <20 g(not include cable) |
|
Microphone Preamplifier Model AWA14600E~14614E
